Most Recent Build
just got the processor and mb that day
thickboi
ASUS X399 Strix
testing
fun fact that is the stock heatsink from a AMD FX8350 just sitting on top
Stock CoolerMaster 500P
triple 140 rad fits! When you cut some stuff out >.>
This is Leviathan. My first customloop machine and most powerful machine I have ever built
EKWB Monoblock for ASUS X399 mbs
Barrowch Boxfish 250ML res install
DONE
So fun fact. I drilled a hole through the basement plate under the res. But I ended up moving the plate over so that hole was a mess up that turned into outlet from the pump.
Temp plug fitting. I wanted this to monitor the watertemps with software. But i hate the black wire.
YAAAAAAAAAAAAS
PUMP AND TOP
TOP
PUMP
MEEEEEEEEEEEEEEEERG Bonus basement video/drainplug https://photos.app.goo.gl/YgfXqSNykxRhK1uN8
My first pipe bend. 13ID 16OD frosted acrylic alphacool piping btw
another one
Xflow rad from alphacool. But I need it white >.>
I put on another coat after this pic. Its flawless. Trust me.
Radeon VII to waterblock fusion?!
Okay now look. THATS HOW EKWB WANTED ME TO PUT ON THE PASTE..... seriously >.>
Done...
soooo the rad was awkwardly too close to the front one. So i had to use soft tubing here... :(
Fun fact. All the motherboard, fan, and rad mounting screws are countersunk with blue washers
Reason for the adapter: The 2nd M.2 slot on the MB makes the ssd out up and out from the MB...
done here....
Oh thats my main M.2 :3
2nd M.2 in, and graphics card in. and 4 packs of ram...
Mmmmmmm
Last 2 pipes are done. Fun fact: I RAN OUT OF TUBING! IF I MESSED UP HERE I WOULDVE HAD TO ORDER MORE!
..... I had 2 leaks the first time >.> It was the in and out for the front rad. Come to find out the brace was the issue towards the top of the case. I cut 2 holes out so the inlet and outlets would fit through but the fittings werent able to screw in fully. I cut out the entire brace and that fixed the issue. No further leaks. Did have some trouble filling it. Didnt have a way for the air to escape. Bought a exhaust fitting the next day.
SHES ALIVE AND EVERYTHING WORKING AFTER A 14 hour leak test
She cute :)
Check the Update 1 on the build for a list of changes.
Leviathan
I needed a new machine to keep up with video editing and also gaming and streaming. And well I got the threadripper for 400$ on blackfriday. I was concerned about temps soooo first custom loop was in order lol.
Color(s): Black White
RGB Lighting? Yes
Theme: none
Cooling: Custom Liquid Cooling
Size: E-ATX
Type: General Build
Build Updates
Update 1
Hardware
CPU
$ 850.00
Motherboard
$ 639.00
Memory
Graphics
Storage
$ 104.99
Storage
Case
$ 204.60
Case Fan
$ 19.99
Case Fan
$ 35.99
Cooling
$ 79.99
Cooling
Cooling
Cooling
$ 129.99
Cooling
Cooling
CableMod
$ 138.23
Approved by: