Red Bull Mini Fridge watercooled PC

  1. Home
  2. /
  3. Builds
  4. /
  5. Build
Keith Telesh
Member since
Food server
Las Vegas, United States
Build Views
Build Approvals

Most Recent Build

Red Bull Mini Fridge watercooled PC

Red Bull Mini Fridge Custom Water-Cooled pc
What to say.... I've been searching for my staple build and I think this is it. I have been eye balling this Red Bull mini cooler at work for like a year now and have always looked at it and said it would make a great case. I had an opportunity to purchase it and do it so I ran with it, At the end I am really happy, all went well.

Side note: The entertainment center it is on was taken apart, painted and I mirror tinted the glass to match the red bull case

(1 of 4)
This case from what I have read has only had 400 in production.... I don't believe it because I now have 4 in my possession and plan on making computers out of the other 3 as well.

Red Bull Mini Bartender Display Fridge/Cooler by Vestfrost - Custom Water-Cooled PC Computer
YouTube Video

The Build
I honestly didn't know what I was getting into. I bought this knowing what I can do with the inside of the fridge but didn't know what I had to work with in the back. I took it apart and I saw it all.... It's like this mini fridge was built to be modded to a case... So I did.

The insulation had to be removed but I couldn't remove it all because some of it is what hold the case together. I took out all the copper and metal tubing and drilled my 120mm fan holes and sprayed the back with plastidip

Water cooling
I did a mix of hard and soft on this build. I used the XSPC pump on my old resv and the new resv I purchased is really perfect for this build. Over all very happy except for the only room for one 240mm rad. It runs warm and I'd like to overclock But don't want to have higher temps.

Thanks for looking and keep on building!
Key Features:

Barrowch Boxfish Series Acrylic Box Reservoir with Digital OLED Display & D-RGB LED by Barrow
I was originally going to just run a tube from the plug fitting to the gpu but I saw this and I knew it was made for this build

Barrow Infinity Mirror RGB LRC2.0 CPU water-block for Water-cooling Supreme Edition LTFHB-04N-V2
I know you can't see it but I really was trying to pay attention to detail. It was only $60 too, and it is so beautiful

Gigabyte - GA-Z270N-Gaming 5 Mini ITX LGA1151 Motherboard
Finding a 7 gen motherboard is hard now these days and finding a mini itx is even harder. This rocks too. It controls the Phanteks Halos with the gigabyte rgb fusion and the board has WiFi and Bluetooth.

Noctua - NF-P12 redux
I've always wanted to do a build with these but could never find a color scheme in my builds, then I started thinking for flash with this build so I decided to add the Halo frames and keep good noctua fans in this build

RGB LED lights
I used Barrow Self Adhesive LRC2.0 Version RGB LED Strips, on the gpu, the boxfish res, and 2 on top controlled Barrow LRC2.0 Controller with Remote from ModMyMods
Color(s): Silver
RGB Lighting? Yes
Cooling: Custom Liquid Cooling
Theme: Brand
Size: Mini-ITX
Type: General Build


$ 420.00
Intel - Core i7-7700K
Socket: LGA 1151
Cores: 4
Integrated Graphics: Yes
Gigabyte - AORUS Gaming 5
Chipset: Z370
CPU Socket: LGA 1151
Size: ATX
$ 239.99
G.Skill - Trident Z (3200MHz) (Black/RGB)
Type: DDR4
Capacity: 32 GB
$ 524.97
Gigabyte - Gaming
Chip Manufacturer: NVIDIA
Chip: GTX 1070 Ti
$ 490.00
Intel - 545s (2x)
Form Factor: 2.5 Inch
Interface: SATA 6 Gb/s
Capacity: 512 GB
$ 152.13
Samsung - 860 EVO
Form Factor: 2.5 Inch
Interface: SATA 6 Gb/s
Capacity: 1 TB
$ 118.94
Wattage: 650
Form Factor: SFX
Efficiency: 80+ Gold
Custom - Custom (custom)
Case Fan
$ 111.20
Noctua - NF-P12 redux-1700 (8x)
Size: 120 mm
Barrow - CPU Blocks
Type: Custom Loop
Barrow - Reservoir
Type: Custom Loop
Bykski - CPU Blocks
Type: Custom Loop
XSPC - Pump
Type: Custom Loop
XSPC - Radiators
Type: Custom Loop
Unable to dertermine total build value (missing part value)
Approved by: