This was a test fitting. I reduced the gap between the acrylic plates by 5mm to 15mm, better fitting the fan flush with the surface
Mystic Dan
This build used a modded Dan 7.25 litre case to allow the use of a Big Shuriken 2 rev. b cooler with a 12x25mm Noctua fan.
The total cooler height is 73mm, whereas the normal Dan has a max cooler height of 48mm.
I can therefore run the 9700k with an all core overclock of 5GHZ, whilst maintaining temps in the mid 80s during a 30 min realbench run.
Funnily enough, the next job is to replace the stock cables with some cable mod cables.
The total cooler height is 73mm, whereas the normal Dan has a max cooler height of 48mm.
I can therefore run the 9700k with an all core overclock of 5GHZ, whilst maintaining temps in the mid 80s during a 30 min realbench run.
Funnily enough, the next job is to replace the stock cables with some cable mod cables.
Color(s): Black
RGB Lighting? Yes
Theme: none
Cooling: Air Cooling
Size: Mini-ITX
Type: General Build
Contests
This build participated in 2 contests.
| Rank | Contest | Date |
|---|---|---|
| #127 | The builds.gg Stock Cooling Showdown - Air Cooling Division | ended |
| #1471 | The builds.gg 10K Challenge | ended |
Hardware
CPU
$ 275.13
Motherboard
$ 400.00
Memory
$ 73.99
PSU
$ 137.99
Case Fan
$ 18.95
Cooling
$ 29.99
Approved by: