The Dsquared2 Project

  1. Home
  2. /
  3. Builds
  4. /
  5. Build
Intellence
Intellence
  • Frequent Builder
Member since 2021-03-18
Athens, Greece
www.intellence.eu
Build Views
794
Build Approvals
21
Fistbumps
14
Followers
4
Posts
6

Most Recent Build

 Polar Punish V.1
85
4
5

Best Build

 Coyote Sniper
195
7
2
Testing an Asus ROG Strix Z390 motherboard on the covered panel of Antec Striker to fit a Samsung SSD on the pocket of the denim used.
Testing an Asus ROG Strix Z390 motherboard on the covered panel of Antec Striker to fit a Samsung SSD on the pocket of the denim used.
An Asus ROG Strix Z390 is used to test the denim parts that will be sewn with the suede back to cover Antec Striker's panel.
An Asus ROG Strix Z390 is used to test the denim parts that will be sewn with the suede back to cover Antec Striker's panel.
An Asus ROG Strix Z390 is used to test the denim parts that will be sewn with the suede back to cover Antec Striker's panel.
An Asus ROG Strix Z390 is used to test the denim parts that will be sewn with the suede back to cover Antec Striker's panel.
Testing an Asus ROG Strix Z390 motherboard on the covered panel of Antec Striker to fit a Samsung SSD on the pocket of the denim used.
Testing an Asus ROG Strix Z390 motherboard on the covered panel of Antec Striker to fit a Samsung SSD on the pocket of the denim used.
Testing an Asus ROG Strix Z390 motherboard on the covered panel of Antec Striker to fit a Samsung SSD on the pocket of the denim used.
Testing an Asus ROG Strix Z390 motherboard on the covered panel of Antec Striker to fit a Samsung SSD on the pocket of the denim used.
Both front and back panels covered, sewn and tested with an ASUS RoG Strix Z390 ITX motherboard, a Samsung SSD and Antec's PRIZM Matrix 120 attached.
Both front and back panels covered, sewn and tested with an ASUS RoG Strix Z390 ITX motherboard, a Samsung SSD and Antec's PRIZM Matrix 120 attached.
Just before sewing the front-faced denim with the back suede cover of the panels to verify it is correctly cut to size. Also, the bottom covers of the PSU already covered in cognac colored suede leather. (tip: I/O wholes of the panel are not drilled yet)
Just before sewing the front-faced denim with the back suede cover of the panels to verify it is correctly cut to size. Also, the bottom covers of the PSU already covered in cognac colored suede leather. (tip: I/O wholes of the panel are not drilled yet)
Just before sewing the front-faced denim with the back suede cover of the panels to verify it is correctly cut to size. Also, the bottom covers of the PSU already covered in cognac colored suede leather. (tip: I/O wholes of the panel are not drilled yet).
Just before sewing the front-faced denim with the back suede cover of the panels to verify it is correctly cut to size. Also, the bottom covers of the PSU already covered in cognac colored suede leather. (tip: I/O wholes of the panel are not drilled yet).
Another side of the build just before sewing the front-faced denim with the back suede cover of the panels to verify it is correctly cut to size.
Another side of the build just before sewing the front-faced denim with the back suede cover of the panels to verify it is correctly cut to size.
This is the motherboard (ROG STRIX Z590-I GAMING WIFI) that will be used for this project since this build is going to be used exclusively for gaming. Alongside with an Intel 10900KF and 32Gb of RAM, this will be able to handle almost everything, despite its size.
This is the motherboard (ROG STRIX Z590-I GAMING WIFI) that will be used for this project since this build is going to be used exclusively for gaming. Alongside with an Intel 10900KF and 32Gb of RAM, this will be able to handle almost everything, despite its size.
This is the 32Gb of DDR4 from G.Skill that will be used for this Denim/Leather Dsquared2 themed build.
This is the 32Gb of DDR4 from G.Skill that will be used for this Denim/Leather Dsquared2 themed build.

The Dsquared2 Project

This project was based on Dsquared2 fabrics (denim & leather) that covered an Antec Striker case. Keeping the build as compact as it could be, I tried to provide a modern yet trendy look of something we use daily and is always visible on our desks. Currently this project is under construction and so, photos of the progress will be added so stay tuned for updates.
Color(s): Black Blue Brown
RGB Lighting? Yes
Theme: Case Mod
Cooling: AIO Cooling
Size: Mini-ITX
Type: Concept Build

Hardware

CPU
$ 292.57
Intel - 9-10900KF
Socket: LGA 1200
Cores: 10
Motherboard
$ 549.00
ASUS - Rog Strix Gaming (Z590-I) (WiFi)
Chipset: Z590
CPU Socket: LGA 1200
Size: Mini-ITX
Memory
G.Skill - Trident Z (4400MHz) (Black/RGB)
Type: DDR4
Capacity: 32 GB
Graphics
$ 724.20
ASUS - GeForce ROG Strix OC (Black)
Chip Manufacturer: NVIDIA
Chip: RTX 2080 Ti
Interface: PCIe x16
Storage
$ 186.60
Samsung - 870 Evo
Form Factor: 2.5 Inch
Interface: SATA 6 Gb/s
Capacity: 2 TB
Storage
$ 155.00
Samsung - 980 Pro
Form Factor: M.2
Interface: M.2 (M)
Capacity: 1 TB
PSU
$ 255.75
Corsair - HX850i
Wattage: 850
Form Factor: ATX
Efficiency: 80+ Platinum
Case
Antec - Striker
Type: Mini-Tower
Side Panel: Tempered Glass
Case Fan
$ 128.38
Antec - Prizm Cooling Matrix
Size: 120 mm
Cooling
$ 76.08
ASUS - ROG Strix LC (Black/RGB)
Type: AIO
Size (WxHxD): 240 mm (2 x 120 mm)
CableMod
$ 69.90
CableMod - C-Series Basic Cable Kit for Corsair RMi / RMx / RM
Mode: Stock
Sleeve: ModFlex
Color: White
CableMod
CableMod - C-Series Basic Cable Kit for Corsair RMi / RMx / RM
Mode: Stock
Sleeve: ModFlex
Color: White
50
0
2022-10-20
2022-10-21