This is the final result of the case before delivery.
The PSU cover from inside the case was also 3D printed with the Aztec pattern of the RoG Strix Community.
The side panel was 3D painted with the Aztec pattern of the RoG Strix Community.
This is the case during the modifications made.
Some small parts of the case were also wrapped in the same printed vinyl to match the outer pattern.
The GPU's shroud was also wrapped in printed vinyl, matching the exterior of the case.
This is the front painted vinyl wrapped on the front and top panel of the case.
Polar Punish V.1
This PC came by from a friend that needed to change his existing case. So, this came up on a Sharkoon Pure Steel RGB since he loved the "Punisher" theme. I used printed vinyl and 3D printing on some of the panels. It was the least I could do to a small budget but my friend's reaction was priceless.
Color(s): Gray White
RGB Lighting? Yes
Theme: Comics
Cooling: Air Cooling
Size: ATX
Type: General Build
Hardware
CPU
$ 199.99
Motherboard
$ 179.00
Memory
$ 158.99
Graphics
$ 179.99
Case
Approved by: