This is a customer build. I modified the huge Raijintek Eris Evo showcase to fit a dual loop for CPU and GPU , a 5inch monitor and a custom made waterway on the back. Vertical gpu mount is acrylic custom made with an illuminated Raijintek logo. The 2nd pump-reservoir as well a 5inch monitor are mounted in the bottom part of the case and xt acrylic windows in front and back of the case was used to replace the solid black steele parts of the case. A custom waterway that displays the Unboxholics logo, was designed and created with casted acrylic and 3dprinted parts to fit in the back of the case. Watercooling parts used in this build are from Bitspower,Phanteks,EKWB,Alphacool and Raijintek , also 2x360, 6.5mm thick Radiators from Raijintek. Tubbing is 14mm and the RGB fittings are the Raijintek PELIAS kit , also flex tube was used for connecting the letters in the waterway. Many custom 3d printed parts was used for this project.