LCD can display water temperature, flow rate and pressure, etc.
Uses genuine wood and baking finish.
Wiring and waterway are made with one acrylic block.
The protagonists are AQUA and HOF.
Exhaust heat structure has various ideas.
Imagine completion with 3D modeling before starting PC build.
I'm trying to make it glow evenly.
D5 pump in series.
No one will notice that there is a Peltier element.
LED can be RGB controlled.
The design on the back is important.
Limited model specializing in OC
Modern furniture (Full scratch case)
Hello from Japan!
It took 3 years from conception to make the film, but finally the main characters are ready. This work is the third water-cooled PC, and I made a custom case for the first time. I had many challenges for the first time, and I was able to learn various techniques. The concept of the work is modern furniture, with particular attention to detail and lighting. In order to express a beautiful curve, wood is cut with CNC and both sides of a huge acrylic are cut.The skeleton uses an aluminum frame and is fixed to the acrylic block with a wooden frame (NO BOLT). The exterior is baking finish and the sides are pasted with 0.3 mm sliced wood. With these, strength, lightweight, and design are compatible. You can check the temperature, flow rate, pressure, etc. of the components on the installed LCD.The radiator has an auxiliary cooling mechanism using a Peltier element in addition to the radiator(360mm+240mm). It also has other unique features!