Introducing our second iteration of our open air chassis called the Magnus. Although it is mainly focused for custom loop builds, the chassis can easily accommodate all in one coolers as well. The main panels of the chassis are made out of 1.5mm graded steel. The supporting brackets, the feet and the GPU bracket are all made out of 3mm graded steel. For weight reduction, the back service panel and the top "hat" are made out of 1.5mm aluminum. Powder coated with a scratch resistant paint called: Black Sand. The chassis can support two 360mm radiators on both sides and up to 60mm in thickness if placed on the inside of the chassis. If radiators are placed on the outside, there are no thickness limitations. The back of the chassis can accommodate large variety of pump-reservoir options as well. There are no length restrictions neither for the PSU neither for the GPU. The Magnus II definitely makes a presence not only on your desk but in your room as well.