The UV-Stipes are build in the frame from the case. You cannot see them from the outside.
There is a spacer between the vertical mount an one of the Fans. This will be switched to a black one. If you see ist on the picture. ;)
The Hard Tubes needed a bit more perfection... Next Time! ;)
Two vertical cards with riser cables connected to the mainboard in the "right" slots!
Simple Flowmeter from Alphacool.
For the upper connection (Rad to DistroPlate) i use a short Soft Tube because of the angle and short way.
Fillport connected to the DistroPlate. For that i used used angles and a short Soft Tube.
Drainport + temp sensor. Just for connecting a fitting with a short Soft Tube... ;)
Lian-Li O11 Dynamic XL Black Custom WaterCooled EKWB Aorus Build - Intel + nVidia
My First PC-Build with Custom Water Cooling
I hope you enjoy my Lian-Li, EKWB, Aorus, Intel & Seasonic Build with UV-Green reactive fluid.
>>> Inspired & triggered by famous youtubers like LinusTechTips, Jayztwocents, Bitwitkyle, PaulsHardware, GamersNexus & Der8auer! Thank you very much for your great videos!!!
Technical Data Overview:
- Intel Core i9-9900K @ 4.8 GHz AllCore (less Temps & power consumption)
- Gigabyte 32 GB 3200 MHz Aorus ARGB RAM Kit (4x 8GB)
- Gigabyte Z390 Aorus Master Mainboard
- Samsung EVO 970 Plus 500 GB NVME SSD (Aorus Version not available / Windows Drive)
- Gigabyte Aorus 1000 GB NVME PCI-Express SSD (Game Drive)
- Intenso 512 GB M.2 SATA 3 SSD (only for temporary random Data)
- Aorus RTX2080 Super Waterforce WB (+100 MHz GPU & +700 MHz RAM OC)
- Seasonic Prime Gold 1000 Watt fully modular
Other Specs:
- Lian-Li O11 Dynamix XL Black Case
- Lian-Li Vertical GPU Mount
- Lian-Li Riser Cable (2x for GPU & SSD)
- Lian Li BR120 Fans 7x (6x Out, 1x In - Negative Pressure)
- Lian-Li ARGB ATX & PCI-Express GPU Power Cable
- Cablemod Black Sleeved Cables (angled USB 3.0 + 2x 8Pin Mainboard Power)
- AlphaCool Eisflügel Flowmeter
- EK/Lian-Li Distro Plate
- EK Coolstream PE360 360x120x45 (2x)
- EK Velocity ARGB Block
- EK Temp Sensor is hidden at the Back of the DisroPlate (connected to Mainboard)
- EK ARGB Adapter 1 to 6
- EK HD Clear PETG Tubes 12/10
- EK Fitting, Angles, and more... in nickel silver
- EK Fill Port on the Top of the Tower
- EK Drain Port at the Back of the DistroPlate
- Mayhems Cooling Fluid in UV-Green (about 1.25 liter used )
- DeepCool ARGB LED Stripes (2x) under the Case (Alu Frame)
- UV-Lighting within the Case in an angled black ALU Frame
- Some FAN Cable hidings and extra drilled holes in the Case
The tubes are not yet perfectly bent and not 100% parallel to each other but this will be improved in the upcoming cleaning of the water cooling! I choose the lower CPU frequency because of a simple thing! Much lower energy usage paired with less heat! The Fans at the bottom are pushing air through the Radiator (i know it). I choose this because of better optic and there is enough cooling! I clean my Build when needed!!! ;)
Forgive me for the mistakes in the English spelling.
Greetings from Germany
Color(s): Black
RGB Lighting? Yes
Theme: none
Cooling: Custom Liquid Cooling
Size: ATX
Type: General Build
Hardware
CPU
$ 395.00
Motherboard
$ 419.49
Memory
$ 349.98
Graphics
$ 399.99
Gigabyte - GeForce AORUS WaterForce WB
Chip Manufacturer: NVIDIA
Chip: RTX 2080 SUPER
Interface: PCIe x16
Storage
$ 611.98
Storage
$ 79.99
Case Fan
$ 119.00
Cooling
$ 178.00
Cooling
Approved by: