The fan grills and the letters on the PSU chroud are 3d printed and painted.
Also the PSU shroud was made by me.
Behind all my hardware, i mounted a polystyrol plate, to cover all the unused screw holes of the case. This is also to create a cleaner look. All "normal" screws are changed to stainless steel screws with purple washers. I like the look more.
I cutted a Polystyrol plate to cover the buttom of the vertikal mount. Otherwise there would be just a hole under it.
I also used the "small" Slot Plate to get a cleaner look. I also changed the cummon Screws to ionized Thumbscrews.
Currently the GPU is not hooked up to the custom loop. I recently recieved the GPU waterblock. I will mount it as soon as some other parts arrive.
The CPU Monoblock was part of the Motherboard package and was produced by EKWB.
I built this new computer for myself. As my wall behind the pc is purple, i wanted to add this color as accent in the built. The polystyrol plates are mounted behind the motherboard, to cover all the unnecessary screw holes, and the second one is the PSU shroud. The fan grills, the letters (signs) on the PSU shroud and the adapter plate under the pump mount are self printed and painted.
To be continued:
I already ordered a waterblock for the GPU. Once this arrive, i will mount it, add another Radiator to the loop and do the Hard-Tubing again. Also the CPU Cables at the top, are already ordered (The same style as the others). After this i will post some picture here and modify the part list :)
I was unsure what i should paint or print on the PSU shroud. So i choose the title of one of my favorite animes. i created the 3d model with fusion360 and printed it. Now, as my pc is on my desk, i placed i little figure of one of the protagonists between the pump and the psu Maybe i will change the shroud one day to another theme.
Leave me a comment on how you like my first custom Loop built ! :D