Benedict_Canyon
Benedict Canyon Computers
Member since
IT Project Management
Los Angeles, United States
Most Recent Build
Zero Maintenance Watercooling
CPU: Intel 9900k
Motherboard: AsRock Taichi Ultimate
RAM: 64 GB Corsair Dominator DDR4 2666 mhz CL 15
Case: Phanteks Eclipse P600s
GPU: EVGA RTX 2080 Ti XC w/ EKWB RTX 2080 Ti RGB waterblock and backplate
Storage: 2x Samsung 970 Evo 2TB NVMe
3x Samsung 860 Evo 4TB SSD
PSU: EVGA 1000 G3
This system was built for high-end video editing, music engineering, and 4K gaming. It was designed to be fully watercooled with little required maintenance, making use of acetal blocks and pump tops along with EKWB's Zero Maintenance Tubing (ZMT) and Mayhems X1 clear coolant. If you're looking for the performance and silence of watercooling without the troublesome maintenance, this is an ideal set up.
The waterblocks are from EK and Watercool for the GPU and the CPU respectively. The pump combo is a D5 in a Singularity Computers pump top and reservoir. The radiators are from Hardware Labs in the 30mm thin class and the fittings are a combination of EK and Bitspower. The Phanteks Eclipse p600s case is built for watercooling, with fantastic radiator capacity and dedicated drain and fill ports included.
The full custom PSU wires were made in house from 16AWG wire and MDPC-X Carbon BTI sleeving.
Motherboard: AsRock Taichi Ultimate
RAM: 64 GB Corsair Dominator DDR4 2666 mhz CL 15
Case: Phanteks Eclipse P600s
GPU: EVGA RTX 2080 Ti XC w/ EKWB RTX 2080 Ti RGB waterblock and backplate
Storage: 2x Samsung 970 Evo 2TB NVMe
3x Samsung 860 Evo 4TB SSD
PSU: EVGA 1000 G3
This system was built for high-end video editing, music engineering, and 4K gaming. It was designed to be fully watercooled with little required maintenance, making use of acetal blocks and pump tops along with EKWB's Zero Maintenance Tubing (ZMT) and Mayhems X1 clear coolant. If you're looking for the performance and silence of watercooling without the troublesome maintenance, this is an ideal set up.
The waterblocks are from EK and Watercool for the GPU and the CPU respectively. The pump combo is a D5 in a Singularity Computers pump top and reservoir. The radiators are from Hardware Labs in the 30mm thin class and the fittings are a combination of EK and Bitspower. The Phanteks Eclipse p600s case is built for watercooling, with fantastic radiator capacity and dedicated drain and fill ports included.
The full custom PSU wires were made in house from 16AWG wire and MDPC-X Carbon BTI sleeving.
Color(s): Black Carbon Silver
RGB Lighting? Yes
Theme: Technology
Cooling: Custom Liquid Cooling
Size: ATX
Type: General Build
Contests
This build participated in 1 contest.
| Rank | Contest | Date |
|---|---|---|
| #1198 | The builds.gg 10K Challenge | ended |
Hardware
CPU
$ 449.00
Motherboard
$ 199.99
Memory
$ 400.00
PSU
$ 228.84
Case
$ 162.00
Estimated total value of this build:
$ 4,566.80
Approved by: