Hey everyone ,

Highly anticipated this year , the « Cyberpunk 2077 » project is done and i present to you my vision.
This project made use a lot of different techniques “ laser cutting , 3D print , resin , paint “

Base is an Antec Torque modified which I have kept a largely recognizable shape.

I want to give to this case a certain fineness so I decide to delete the two glasses on each side to replace by metal plate with some 3D prints which are either aesthetic parts or supports parts.

Everything was to imagine on this case each addition of plate requires a piece of support which I had to start 2 or 3 times for certain parts to obtain a perfect fit.

As you will see in the photos of the cases, there is a lot of detail everywhere on the case, so I invite you to look each photo.

I m really satisfied with the final result of this project because the pc look exactly like the mockup I have drew one year before.

Config :

CPU : Intel Core i7 10700k
CM : Asus maximus XII Formula
CG : Nvidia RTX 2080Ti Cyberpunk 2077 Edition
RAM : Gskill Trident Neo RGB 3600Mhz
SSD 1 : Samsung EVO 1Tb
SSD 2 : Samsung EVO 1Tb
PSU : Asus Thor 1200W
Case : Antec Torque White
Cable : Kit cablemod Custom Kit
LED : Cablemod led Strip 60cm

Watercooling :

CPU block : EK momentum VRM bridge special rog maximus XII
Pump : EK D5 XRES 300
Fitting : EK Quantum Torque HDC16
Radiator : EK Coolstream Classic PE360
Fan : EK Vardar X3m 120ER D-RGB

I would like to thanks Nvidia to send me an collector card « cyberpunk 2077 edition » , I measure the luck to got this card.

Thanks to Asus to support me during this year

Thanks to Gskill to trust on me for all my projects

Thanks to EK Waterblocks to follow me all years since I start this activity.

Thanks to Antec for send me two cases, powersupply and fans.

Thanks to Intel for support me everytime with new generation of processors.

Thanks to Cablemod for providing me with quality cables for every project without hesitation.

I m very lucky to have such cool sponsors who trust me blindly on the artistic direction of my projects.

Thanks to johnsteel companies for my laser cuts of metal parts, Thanks to Mike from MP custom for the plexi laser cuts

Thank you to my community for always being there to pull me up.

If you have read so far that you appreciate my work and want to support it, like, share and how this post to give me visibility.