Closeup of Thermaltake P7 Core Chassis in darkness.
Closeup of EKWB Waterblocks GTX1070Ti's - in darkness
Closeup of EKWB Waterblock GTX1070Ti - in darkness
Closeup of Thermaltake P7 Core Chassis - in darkness.
Closeup of Thermaltake P7 Core Chassis in natural light.
Close up of Radiator and Reservoir/Pump - left chassis
Close up of Radiator and Reservoir/Pump - right chassis
Closeup of Thermaltake P7 Core Chassis in natural light.
Closeup of EKWB Waterblock GTX1070Ti.
Closeup of EKWB Waterblock CPU Cooling.
Thermaltake P7 Core Build
This is my first PC build from scratch, my last PC build being back in 2000. Had to read up on lots as technology has moved along so much since then, not to mention learning new things such as tube bending etc
Future upgrades will be replacing the ASUS GTX1070Ti's I bought them for next to nothing as well as the EKWB waterblocks being on special at the time. Would like to swap both out for a RTX Series in the near future. Would also like to swap out the sleeved cables for some custom made CableMod sleeved cables.
All in all I enjoyed getting back into building my own PC again, along with it being different from the normal PC case. Now that the build is all done, the next job is to mount it up on the wall above my desk.
Sadly the photos don't capture the RGB lighting very well because of the poor light in the study..
*PSU: Corsair RM1000x *GPU: Dual Asus Cerberus GeForce GTX 1070 Ti 8GB GDDR5 Advanced Edition *CPU: Intel Core i9-9900K *MOTHERBOARD: ASUS ROG Strix Z370-E Gaming *RAM: Team T-Force Night Hawk RGB 3000MHz 32GB *SSD: Samsung 970 EVO M.2 1TB and Western Digital WD NAS RED 4TB x 2 *All cooling is Thermaltake: Radiators, Riing Plus RGB 120 fans, Pacific PR-22-D5 Plus Pump/Res Combo, RGB Plus Fittings, CL1000 coolant, PETC Tubes. EKWB: GPU Waterblocks and Motherboard Monoblock, Fittings *CHASSIS: Thermaltake P7 Core *ASUS ROG Strix HB SLI Bridge *CABLEMOD Modmesh Cables *ASUS ROG AREION 10G NIC