The Pocket Rocket (Second Build)

  1. Home
  2. /
  3. Builds
  4. /
  5. Build
That1WhiteFoST
Austin Alexander
Member since
Computer Engineer Student
Rolla, United States
Build Views
210
Build Approvals
3
Fistbumps
2
Followers
1
Posts
2

The Pocket Rocket (Second Build)

This is my second computer build, which was completed in the summer of 2018. The purpose of this computer is mainly gaming, 3D modeling, a ton of college work, and to be overkill... The college work consist of "normal" engineering homework to more advance simulations and of course the aforementioned 3D modeling. At the time of building this computer, it cost roughly $2600. A full price breakdown, along with a total, can be found in the images above. I am sure if anyone is looking at this in the near future, most of the prices will be nonexistent on the part list due to parts being replaced by their predecessors.

I have not settled on an overclock for my CPU yet, but I have mess around with it quite a bit. I do not think I will be leaving my CPU on a permanent overclock due to the heat it generates. In my previous build I had a FX-8370 CPU paired with a Gigabyte - Radeon R9 390X 8 GB SOC GPU (The Atomic Pillar) and that combo would literally raise my bedroom temperature 10°F to 15°F, and I do not want to go back to that. If I do settle on a permanent overclock, my goal will be to have the CPU's clock rate between 4.15 GHz and 4.20 GHz. The maximum temperature I hit on my CPU under stock-clock is 58°C with an ambient room temperature of 24°C, so there is a decent amount of headroom when it comes to temperatures, since the maximum temperature for the Ryzen 7 - 2700X is around 85°C. This maximum temperature of 58°C was reached after nine straight hours of running an AIDA64 Extreme CPU stress test. This stresses the CPU at 100% until the test is manually stopped or the CPU thermal throttles.

The maximum temperature reached by the EVGA GeForce GTX 1080 Ti 11 GB SC2 was also achieved after running an AIDA64 stress test, but this stress test was only ran for one hour. The GPU stress test on AIDA64 works in the same manner as the CPU stress test. It utilizes 100% of the GPU for the duration of the stress test, or until the GPU thermal throttles.

I have had absolutely zero issues with this build, and it performs exactly the way I expected. Leave your thoughts and any concerns you may have in the comment section below!

Monitor: MSI - Optix G27C2

Keyboard: Corsair - K55 RGB

Mouse: Corsair - Glaive RGB

Headset: Corsair - Void Pro Wireless

Speakers: Logitech - Z333

The Atomic Pillar (First Build)
builds.gg Link: https://builds.gg/builds/the-atomic-pillar-first-build-7640
PCPartPicker Link: https://pcpartpicker.com/b/fY29TW

The Pocket Rocket (Second Build)
builds.gg Link: https://builds.gg/builds/the-pocket-rocket-second-build-7643
PCPartPicker Link: https://pcpartpicker.com/b/pCKBD3
Color(s): Black White
RGB Lighting? Yes
Theme: none
Cooling: AIO Cooling
Size: Mini-ITX
Type: General Build

Hardware

CPU
$ 184.00
AMD - Ryzen 7 (2700X)
Socket: AM4
Cores: 8
Motherboard
$ 256.45
ASUS - ROG Strix Gaming (X470-I)
Chipset: X470
CPU Socket: AM4
Size: Mini-ITX
Memory
$ 152.99
G.Skill - Trident Z (3200MHz) (Black/RGB)
Type: DDR4
Capacity: 32 GB
Graphics
$ 268.00
EVGA - SC2
Chip Manufacturer: NVIDIA
Chip: GTX 1080 Ti
Storage
$ 215.00
Samsung - 860 EVO
Form Factor: 2.5 Inch
Interface: SATA 6 Gb/s
Capacity: 2 TB
Storage
$ 104.99
Samsung - 970 EVO
Form Factor: M.2
Interface: M.2 (M)
Capacity: 250 GB
PSU
$ 199.99
EVGA - SuperNOVA G2
Wattage: 850
Form Factor: ATX
Efficiency: 80+ Gold
Case
$ 69.99
NZXT - H200 White/Black
Type: Mini-Tower
Side Panel: Tempered Glass
Case Fan
Enermax - T.B. RGB
Size: 120 mm
Cooling
$ 162.98
Enermax - LIQMAX II 240
Type: AIO
Monitor
$ 1,114.97
MSI - Optix (G27C2)
Size: 27 Inch
Panel: VA
Refresh Rate: 144 Hz
Keyboard
$ 49.99
Corsair - K55
Interface: Wired
Key Switch Type: Membrane
Type: Full Size
Mouse
$ 94.99
Corsair - Glaive RGB
Interface: Wired
153
2
Approved by: