3D printed 5.25" VR pass through mount (out of date now has USB 3.1 panel)
Stealth-Cool Liquid Metal
So after many years or progressive upgrades then a couple years of no upgrade I finally got the opportunity to start from scratch. I wanted a black and white build that gave me the ability to take part in my favourite hobbies, overclocking, VR, 3D Printing and gaming yet still run my business, (cant look too crazy to visitors) so here is my creation. "Stealth-Cool Liquid Metal" based around the Fractal Design Define R6 it has some lite 3D printed parts to route VR inputs (HDMI USB3) to the front of the case and a 3D printed PCIE insert to keep cables tidy. although its RGB motherboard all the LEDs are set to White to give, what i think, a more mature rugged and clean look. but ill let you decide.
The important stuff: CPU is i7-8086K Limited Edition De-Lided and Liquid Metal overclocked to 5.4Ghz (all cores) 1.475v runs around 65c or 45c above ambient and is cooled by Arctic Freezer Liquid 360
GPU is Zotac Nvidia GTX 1080Ti and has Alphacool EisWolf M-18 water block with Liquid Metal on the die and is overclocked to 2100MHz stable (about 51c) 30c above ambient.
She is as stealthy as a B-2 Bomber and packing technology to kill for. This titan is ready for anything you can chuck at her.
Color(s): Black White
RGB Lighting? Yes
Theme: Color
Cooling: AIO Cooling
Size: ATX
Type: General Build
Build Updates
Ram upgrade and case upgrade (same case but upgraded)
Installed extra 16GB RAM so DIMMS are fully populated with 4x 8GB also installed the USB 3.1 fascia upgrade for the fractal design R6 the pics are not out of date.