Corsair Vengeance RGB Pro kit with 2x Lighting enhancement kits.
Ducky Pocket, GMMK, and Swiftpoint Z.
Bykski (N-EV1080-X) block with Alphacool GPX FTW backplate.
Top UT60 360 radiator, GT fans.
Dual DDC Watercool.de top, with 2x EKWB DDC 3.2PWM pumps.
The setup. Mayflower Electronics ARC DAC, GSP 600, VISION table top unit, VISION touch screen unit, Synology DS218j, and TP LINK switch.
The motherboard setup, BP Armors on the bottom.
7800X delided, this is odd ball 7800X since it uses the larger die found on the higher core count CPU's.
The back of the system. All the Aquacomputer gear is on the side with custom CZ mounts.
VRM thermal pads upgraded to 17w/mk on the Mosfets and 6w/mk on the Chokes.
MNPCTECH Primo V2 Acrylic Panel along with CZ custom logo plates.
Primo III Mega Rev.
I posted a while back my Primo II build and it was certainly a fun system to make and I learned a lot from it. Moved to X299 from X99 in my spare time to fully redo the system, I added a bunch of custom parts from Coldzero.eu and added many new parts which I believe would give the system a cooling boost. The parts that got changed are all on the cooling side mostly and some storage along with some other cool stuff. Here is what I added to the system:
This was copied from my EVGA account post. Also here is a full list of parts here since builds.gg is missing like half of them and I can't add them.
Added/Changed too:
Intel i7 7800X (Delided)
ICEman X299 Delid Die Guard (7820, 7900, 7920 Frame)
X299 FTWK V2
Corsair Vengeance RGB PRO 32GB (4x 8GB) 3000MHz CMW32GX4M4A2666C16
Corsair Vengeance RGB PRO Light Enhancement Kit Black CMWLEKIT2
Alphacool XT60 360 Black
Alphacool UT60 240 Black
Alphacool HDX2 NVMe PCIe Card
Alphacool HDX5 M.2 RAID PCIe Card
Watercool.de Dual DDC-Case LT Acryl
2x EKWB DDC 3.2 PWM with EKWB Black Heatsinks
EKWB X3 150 RGB Reservoir
12x Nidec Servo Gentle Typhoon PWM 120mm 2150 RPM (D1225C12B6ZPA-64) Sleeved with Black heatshrink and sleeving
Barrow V3 Compression Fittings 3/8-5/8 Black (THKN-3/8-V3) along with various barrow fittings
5x Barrow TZKMF-V2
Various other Barrow Fttings
10ft of Tygon A60-G Neoprene Tubing 3/8-5/8
3x Western Digital NVMe Black 500GB (WDS500G2X0C)
4x Western Digital 2.5 SSD Blue 500GB (WDS500G2B0A)
4x Western Digital 2.5 HDD Black 1TB 7200 RPM (WD10JPLX)
2x Western Digital M.2 SATA SSD 500GB (WDS500G2B0B)
2x Bitspower M.2 SSD Armor Advanced Version, Black
3x Aqua Computer Splitty 9 Hubs
Aquacomputer Aquabus X4
Aquacomputer Farbwerk
Aquacomputer Flow sensor high flow USB G1/4
Aquacomputer Aquaero 5 LT USB fan controller pair with 6 Pro
VISION Glow table top unit with IR receiver and ambient temperature sensor
Aqua Computer Quadro Fan Controller (Hooked up via Aquabus)
GMMK Gateron Blue Switches Keyboard
Mayflower Electronics ARC DAC
Sennheiser GSP 600
EVGA 1000T2
EVGA 1070Ti FTW Ultra Silent Gaming
Bykski N-EV1080-X
FR-CU-RA-V2BK
VRM upgraded with Fujipoly 17w m/k Pad
30mm Asrock HT330 FD123010LS sleeved for VRM heatsink
2x Sunon 60x60x25mm (KD1206PTV2) DDC Heatsink Fans
This was copied from my EVGA account post. Also here is a full list of parts here since builds.gg is missing like half of them and I can't add them.
Added/Changed too:
Intel i7 7800X (Delided)
ICEman X299 Delid Die Guard (7820, 7900, 7920 Frame)
X299 FTWK V2
Corsair Vengeance RGB PRO 32GB (4x 8GB) 3000MHz CMW32GX4M4A2666C16
Corsair Vengeance RGB PRO Light Enhancement Kit Black CMWLEKIT2
Alphacool XT60 360 Black
Alphacool UT60 240 Black
Alphacool HDX2 NVMe PCIe Card
Alphacool HDX5 M.2 RAID PCIe Card
Watercool.de Dual DDC-Case LT Acryl
2x EKWB DDC 3.2 PWM with EKWB Black Heatsinks
EKWB X3 150 RGB Reservoir
12x Nidec Servo Gentle Typhoon PWM 120mm 2150 RPM (D1225C12B6ZPA-64) Sleeved with Black heatshrink and sleeving
Barrow V3 Compression Fittings 3/8-5/8 Black (THKN-3/8-V3) along with various barrow fittings
5x Barrow TZKMF-V2
Various other Barrow Fttings
10ft of Tygon A60-G Neoprene Tubing 3/8-5/8
3x Western Digital NVMe Black 500GB (WDS500G2X0C)
4x Western Digital 2.5 SSD Blue 500GB (WDS500G2B0A)
4x Western Digital 2.5 HDD Black 1TB 7200 RPM (WD10JPLX)
2x Western Digital M.2 SATA SSD 500GB (WDS500G2B0B)
2x Bitspower M.2 SSD Armor Advanced Version, Black
3x Aqua Computer Splitty 9 Hubs
Aquacomputer Aquabus X4
Aquacomputer Farbwerk
Aquacomputer Flow sensor high flow USB G1/4
Aquacomputer Aquaero 5 LT USB fan controller pair with 6 Pro
VISION Glow table top unit with IR receiver and ambient temperature sensor
Aqua Computer Quadro Fan Controller (Hooked up via Aquabus)
GMMK Gateron Blue Switches Keyboard
Mayflower Electronics ARC DAC
Sennheiser GSP 600
EVGA 1000T2
EVGA 1070Ti FTW Ultra Silent Gaming
Bykski N-EV1080-X
FR-CU-RA-V2BK
VRM upgraded with Fujipoly 17w m/k Pad
30mm Asrock HT330 FD123010LS sleeved for VRM heatsink
2x Sunon 60x60x25mm (KD1206PTV2) DDC Heatsink Fans
Color(s): Black
RGB Lighting? Yes
Theme: none
Cooling: Custom Liquid Cooling
Size: E-ATX
Type: General Build
Hardware
CPU
$ 449.99
Motherboard
$ 201.99
Memory
$ 59.99
Storage
$ 103.92
PSU
$ 229.99
Case
$ 294.03
Monitor
Estimated total value of this build:
$ 2,292.55
Approved by: