Mini-ITX — only the essentials

  1. Home
  2. /
  3. Builds
  4. /
  5. Build
Denys Sherstianyi
Denys
Member since
IT
Czech Republic
Build Views
2,396
Build Approvals
53
Fistbumps
27
Followers
9
Posts
15
Upgraded the peripherals since the previous ones didn’t fit the PC concept.
Upgraded the peripherals since the previous ones didn’t fit the PC concept.
Over time, the front distribution panel started to feel too gloomy, so I decided to brighten it up with a nostalgic design.
Over time, the front distribution panel started to feel too gloomy, so I decided to brighten it up with a nostalgic design.
Additionally, I made a few minor adjustments: 1. Replaced the acrylic tubing with black brass ones. 2. Increased the gap between the desk and the bottom radiator by using taller feet.
Additionally, I made a few minor adjustments: 1. Replaced the acrylic tubing with black brass ones. 2. Increased the gap between the desk and the bottom radiator by using taller feet.
Additionally, I made a few minor adjustments: 1. Replaced the acrylic tubing with black brass ones. 2. Increased the gap between the desk and the bottom radiator by using taller feet.
Additionally, I made a few minor adjustments: 1. Replaced the acrylic tubing with black brass ones. 2. Increased the gap between the desk and the bottom radiator by using taller feet.
Additionally, I made a few minor adjustments: 1. Replaced the acrylic tubing with black brass ones. 2. Increased the gap between the desk and the bottom radiator by using taller feet.
Additionally, I made a few minor adjustments: 1. Replaced the acrylic tubing with black brass ones. 2. Increased the gap between the desk and the bottom radiator by using taller feet.
Additionally, I made a few minor adjustments: 3. Added a coolant flow sensor and a dust filter for the top radiator
Additionally, I made a few minor adjustments: 3. Added a coolant flow sensor and a dust filter for the top radiator
remove the excess 1
remove the excess 1
remove the excess 2
remove the excess 2
pump distribution panel template
pump distribution panel template
pump distribution panel
pump distribution panel

Mini-ITX — only the essentials

I'm still working on the final look, but I wanted to show what I've achieved.
In my opinion, there is nothing superfluous in this project, a minimalist assembly with good cooling.
I will be glad to hear the opinion of the community about my project.
P.S. major parts have been improved or designed and made to order
Color(s): Black Blue Clear Gray
RGB Lighting? Yes
Theme: Case Mod
Cooling: Custom Liquid Cooling
Size: Mini-ITX
Type: General Build

Hardware

CPU
$ 539.99
Intel - Core i9-13900K
Socket: LGA 1700
Cores: 24
Integrated Graphics: Yes
Motherboard
$ 339.17
MSI - MPG Z790I Edge WiFi
Chipset: Z790
CPU Socket: LGA 1700
Size: ITX
Memory
$ 336.40
Corsair - Vengeance (7200MHz)
Type: DDR5
Capacity: 32 GB
Graphics
$ 1,250.00
NVIDIA - GeForce Super Founders Edition
Chip Manufacturer: NVIDIA
Chip: RTX 4080
Interface: PCIe x16
Storage
$ 241.98
Samsung - 990 Pro
Form Factor: M.2
Interface: PCIe x4
Capacity: 1 TB
Storage
$ 291.98
Western Digital - WD_Black SN770 (2x)
Form Factor: M.2
Interface: M.2 (B+M)
Capacity: 2 TB
PSU
$ 285.00
Corsair - SF750
Wattage: 750
Form Factor: SFX
Efficiency: 80+ Platinum
Case
$ 208.00
Xtia - Xproto-N
Type: Open Air
Side Panel: Open
Case Fan
$ 211.96
Corsair - iCUE QL140 (RGB) (4x)
Size: 140 mm
Cooling
$ 87.00
EKWB - EK-Loop DDC 4.2
Type: Pump
Cooling
$ 230.00
EKWB - EK-Quantum Surface P280M - Black (2x)
Type: Radiator
Cooling
$ 287.00
EKWB - EK-Quantum Vector² FE RTX 4080 D-RGB - Nickel + Acetal
Type: GPU Waterblock
Cooling
$ 150.00
EKWB - EK-Quantum Velocity² D-RGB - 1700 Nickel + Plexi
Type: CPU Waterblock
Estimated total value of this build:
$ 4,458.48
911
35
Approved by: