As for the circular rings, they are flexible hoses connected in series to link the radiators from the first stage to the second and then the third.
The control unit was also gilded with gold leaf.
Three evaporators specifically designed for AC were installed. I tested them on several devices and they delivered impressive cooling results.
These are mining rig fans known for their high speed of 5400 rpm. They typically operate at a very low, almost inaudible speed, but you can increase the speed if needed.
Gold leaf and air conditioner evaporator
Another project involved using gold leaf followed by clear epoxy coating, along with three AC evaporators that I converted to run on water due to their exceptional cooling performance.
It features diamond-cut accents, a fully epoxy-coated floor, three 5400 rpm fans and one rear exhaust fan with 7000 rpm power, a 600-liter-per-hour pump, and a water block for the graphics card and processor.
It features diamond-cut accents, a fully epoxy-coated floor, three 5400 rpm fans and one rear exhaust fan with 7000 rpm power, a 600-liter-per-hour pump, and a water block for the graphics card and processor.
Color(s): Gold
RGB Lighting? Yes
Theme: Case Mod
Cooling: AIO Cooling
Size: XL-ATX
Type: General Build
Hardware
CPU
$ 399.00
Memory
$ 340.00
Graphics
$ 1,334.40
Estimated total value of this build:
$ 3,302.40
Approved by: