Moved to our new house got new setup in the living room going.

I decided to get some faster and lower latency ram. I did drop in capacity but Ill get it back to 32gb soon. But for now Infound some nice b-die trident z series 3600mhz 15-15-15-35 which is better timings than my Corsair 3000mhz.

Finally after 4 months of waiting got my Rtx 3090 in. This beast can handle +806 on memory and +225 on core. Im about to get a hybrid cooler for it so I can get my temps down. So far Im ranked 62 on Superposition 4k benchmark.

Finally had some time to play with ram freq. I easily got 4000mhz at 16-16-16-37 1.42v. I know I can get higher now. Just need time.

I managed to get 5.2ghz stable, I dropped the cache speed to 4.8ghz and increased vcore to 1.38v and now it its stable. Still cant get my ram to 4000mhz on all 4 sticks. Every time I overclock the ram it sets all 4 sticks to 3200mhz cl14. Then I have to restore optimized defaults. But on 2 sticks I can get 4000mhz cl16. So I just keep all 4 at 3600 cl15.

1440p, 144hz, all at 24in. Its pretty nice monitor, Im diggin it so far. Looks good too.

I got my other set of g.skill 3600 cl15. Put it in and it would not hit 3600mhz with 4 sticks. I had it running at 3200mhz 13-13-13-33. It was stable for 24hrs. Last night I flashed my bios and manually set ddr voltage to 1.41v and bumped my vcore to 1.40v. Now it works perfect at 3600.

Added LinkUp White Cable Extensions.

Finally got my quicksilver and did my delid. Still had to scrape on the solder off the cpu die even with the quicksilver. But Im stable at 5.1ghz with max temps of 82°C.