Asus Strix Z390-i
Asus 3090 EKWB
Asus Thor 1200W
Asus Prime case
Asus Ryujin 360mm cooler
Asus XF120 fans

M-ATX case with itx board
The idea was to have the smallest case possible for a large PSU + 360mm rad, and the possibility to custom loop.
(room for my EKWB custom loop on the back panel if desired), vertical mount small GPU enough place to breathe and exchange air quickly. So I can just switch from air to water with no problem.

RAM was not listed it's 4333mhz CL18 bdie from Corsair.
Cpu is 5.0 GHz, running at 52° full load.
GPU is 1925mhz running at 74° full load but carefully undervolting for memory temps on the back at 92°>.
It's cool and there is still a bit of room to push it harder, 8086k is a wonderful cpu for the price and it's the coolest possible. I did not use a 9900k because it's kinda running hot and it's not delided compare to my 8086k Wich I pasted with liquid metal. Added a custom harness with the Asus color, I might remove 1 red and 1 blue it's overwhelming;)


New old stock, small price very good performance, pretty happy with the result.