Case: Corsair 5000D AIRFLOW Tempered Glass Mid-Tower ATX PC Case — Black

Motherboard: Pro WS TRX50-SAGE WIFI
Managed to shoehorn a CEB motherboard into a case that doesn’t even have an E-ATX rating apparently. I can kinda see why as the cable pass-throughs on the top are almost fully covered, but the bottom ones aren’t due to the motherboard’s design. It works…it will work more once I get custom psu cables that should be more flexible than the ones that game with the Thermaltake PSU. I would say, whether you can fit this or an E-ATX motherboard in a 5000D will just depend on their design and your cable routing. If the side radiator is not being used then it should definitely fit.

CPU: AMD Threadripper 7960X
Slight overclock to 5.6Ghz using PBO. I’m not looking to chase the sun here, just a little bump for single core workloads.

Graphics: Asus ProArt RTX 4080 OC 16GB
Slight overclock +150mhz on core and memory.

Memory: 128GB G.SKILL Zeta R5 NEO DDR5 RAM (4x32GB)
6400MT/s
CL32-39-39-102

Storage:
- 2x 2TB Samsung 980 Pro nvme
- 4TB Samsung 990 Pro nvme
- 4TB SP Silicon Power 2.5” SSD

PSU: Thermaltake Toughpower GF3 1650W

Cooling:
- Case Fans: 6x Noctua NF-A12x25 PWM Case Fans (intake) | 1x Noctua NF-F12 iPPC 3000 PWM Fans (exhaust)
- Radiator: EK-Quantum Surface P360M X-Flow - Black
- Radiator Fans: 3x Noctua NF-F12 iPPC 3000 PWM Fans (exhaust)
- Pump: EK-Quantum Kinetic TBE 200 D5 PWM Pump-Reservoir
- Fittings: EK-Quantum Torque STC-12/16 Compression
- Tube: EK-Tube 12/16mm Black Soft Tubing
- Fluid: EK-Cryofuel Clear Premix

Monitors: 2x Dell S2722QC 27-inch 4K 60Hz

Keyboard: GMMK Pro
- Lubed Glorious Panda Switches
- Some keycaps from Amazon

Mice: Logitech MX Master 3S